| Specification | Description |
|---|---|
| Manufacture | Mitsubishi / 1978 |
| Upgraded 1990 | |
| Shut down 2002 | |
| Materials Processed | |
| - Galvanized Steel | 0.2 - 0.6mm / .008 - .024" |
| - Aluminum | 0.24 - 1.6mm / .010 - .064" |
| Strip Width | 762 - 1000mm / 30 - 39.4" |
| Line Configuration | Two coats on top side |
| Line Speed | 100 mpm max / 328 fpm |
| Coil Size | ID - 508mm / 20" |
| OD - 1270mm max / 50" | |
| Weight- 6 mtons max /13,200lbs | |
| Equipment | |
| - Entry Coil Car | |
| - Uncoiler | |
| - Shear | |
| - Joiner | |
| - Bridle #1 | |
| - Entry Accumulator | |
| - Bridle #2 | |
| - Pretreatment Section | |
| - Primer Coater | 6 grams/m2 dry film |
| - Primer Oven | |
| - Top Coat Coater | 16 grams/m2 dry film |
| - Top Coat Oven | 370C peak metal temp |
| 10 mton/hr capacity | |
| - Bridle #3 | |
| - Exit Accumulator | |
| - Bridle #4 | |
| - Exit Shear | |
| - Recoiler | |
| Items Not Included | Entry steering roll |
| Some pretreatment for galvaniz | |
| Leveler | |
| Belt wrapper | |
| Sold "as is, where is" installed, not running. |
PO Box 1164
Roxboro, NC 27573
+1 336 597 2370
+1 336 597 8633
sales@phippsMetals.com
Asset Sales and Marketing Software for Used and Surplus Industrial Machinery and Equipment Dealers