| Specification | Description |
|---|---|
| Manufacturer | Woonjin (Korea) / 1999 |
| Design | 3-roll type coater |
| Previous Use | Applied chromate on 2-sides in |
| a galvanizing line=chem coater | |
| Equipment | |
| - Entry Backup/Turn Roll | 800mm diam x 1800mm face |
| (31.5" diam x 70.87" face) | |
| Hard chrome plated | |
| - Coater Rolls | |
| - Applicator Roll | 400mm diam x 1800mm face |
| (15.75" diam x 70.87" face) | |
| 15 kW motor | |
| - Pickup Roll | 310mm diam x 1800mm face |
| (12.2" diam x 70.87" face) | |
| 7.5 kW motor | |
| - Doctor Roll | 310mm diam x 1800mm face |
| (12.2" diam x 70.87" face) | |
| 3.7 kW motor | |
| - Coater Side Retracting Mechanism | 2.2kW AC gear motor |
| On top and bottom coaters | |
| - Roll Motors | Vector control of line speed |
| - Exit Backup/Turn Roll | 800mm diam x 1800mm face |
| (31.5" diam x 70.87" face) | |
| Hard chrome plated | |
| - Lift Roll | 600mm diam x 1800mm face |
| (23.62" diam x 70.87" face) | |
| Urethane coated | |
| - Roll Cleaning System | Water spray type |
| Sold "as is, where is" installed and running through October 2007. |
PO Box 1164
Roxboro, NC 27573
+1 336 597 2370
+1 336 597 8633
sales@phippsMetals.com
Asset Sales and Marketing Software for Used and Surplus Industrial Machinery and Equipment Dealers