| Specification | Description |
|---|---|
| Manufacture | ProEco / 1972 |
| Nominal Capacity | 90,000 mtons per year (steel) |
| Strip Thickness | .008 - .054" / 0.2 - 1.37mm |
| Strip Width | 24 - 54" / 610 - 1371mm |
| Coil Size | ID - 20" / 508mm |
| OD - 60" max / 1524mm | |
| Weight - 23,500 lbs max | |
| Line Speed | 300 fpm max / 91.4 mpm |
| Equipment | |
| - Entry Coil Car | 24,000lbs, V-saddle floor type |
| - Uncoiler | 20" diam x 60" face |
| Expandiing mandrel | |
| - Pinch Rolls | |
| - Centering Guide | |
| - Crop Shear | Hydraulic down-cut |
| - Strip Joiner | Behlen |
| - Deburring Unit | |
| - Entry Accumulator | 24" diam x 60" face rolls |
| 40 ft high tower | |
| - Wet Section | 7 tanks |
| - Steering Unit | |
| - Primer Coater | Two-roll, two sides |
| - Primer Oven | 3 zones |
| with water quench & air knives | |
| - Finish Coater | 3-roll top side head |
| 2-roll bottom side head | |
| - Finish Oven | 3 zones |
| With water quench & air knives | |
| - Steering Unit | |
| - Exit Accumulator | 24" diam x 60" rolls |
| 6 rolls over 5 | |
| - Exit Crop Shear | Hydraulic down-cut type |
| - Recoiler | 20" diam x 60" face |
| Expanding mandrel | |
| - Exit Coil Car | 24,000lbs, V-saddle floor type |
| - Controls and Electrics | Complete |
| Condition | Installed and idled |
| Can be run with little effort | |
| No refurbishment needed | |
| Sold "as is, where is" installed. |
PO Box 1164
Roxboro, NC 27573
+1 336 597 2370
+1 336 597 8633
sales@phippsMetals.com
Asset Sales and Marketing Software for Used and Surplus Industrial Machinery and Equipment Dealers