| Specification | Description |
|---|---|
| Manufacture | 1960 |
| Extensive Upgrades | 1988, 1989, 1996, 1998, 2002 |
| Configuration | 2 coat line, primer & top coat |
| Equipped to Coat | Aluminum, cold rolled steel, |
| hot dipped galvanized | |
| Line Speed | 300 fpm max / 91 mpm |
| Strip Thickness | .006 - .055" / 0.152 - 1.4 mm |
| Strip Width | 24 - 58" / 610 - 1473mm |
| Entry Coil Size | ID - 16 - 24" /. 406 - 610mm |
| OD - 70" max / 1778mm | |
| Weight - 30,000lbs max /13.6MT | |
| Exit Coil Size | ID - 20" / 508mm |
| OD - 70" max / 1778mm | |
| Weight - 30,000lbs max /13.6MT | |
| Equipment | |
| - Uncoilers (2) | With floor level coil cars |
| - Entry Shear | |
| - Behlen Strip Joiner | Double-row die |
| - Entry Accumulator | Hydraulic, 235ft strip storage |
| - Pretreatment Section | 9 stations (clean, rinse, etc) |
| - Chem Coater | Vertical type |
| Infra-red gas dryer | |
| - Primer Coater | GFG S-wrap, 2 coater rolls |
| - Primer Oven | 100ft long, 3 zones |
| 5,000,000 BTU/hr per zone | |
| Gas fired 12,500 SCFM oxidizer | |
| - Top Coater | Waldron 2-roll coater |
| - Top Coat Oven | 100 ft long, 3 zones |
| 900 def F capability | |
| 12,500 SCFM oxidizer | |
| - Exit Accumulator | 425 ft strip storage |
| Hydraulic | |
| - Exit Shear | Air type |
| - Recoiler | 100 hp DC drive, belt wrapper |
| coil car | |
| - Coil Upender | |
| Sold "as is, where is" installed. |
PO Box 1164
Roxboro, NC 27573
+1 336 597 2370
+1 336 597 8633
sales@phippsMetals.com