| Specification | Description |
|---|---|
| Manufacture | 1995 |
| Line Speed | 197 fpm / 60 mpm |
| Strip Thickness | .047-.252" / 1.2-6.4mm |
| Strip Width | 16-63" / 400-1600mm |
| Coil Size | ID - 20-24-30 / 508-610-762mm |
| Weight - 66,000 lbs / 30 mton | |
| Material | Hot rolled steel |
| Sheet Length | 20-240" / 500-6096mm |
| Side Trimming | .600" max, each side / 15mm |
| Shear Method | Air powered press |
| Flying die set | |
| Continuous, non-stop operation | |
| Piler Table #1 | Auto drop type |
| Length - 20-120" / 500-3048mm | |
| Piler Table #2 | Auto drop type |
| Length - 20-240" / 500-6096mm | |
| Tolerances | Length - +/- .012" / 0.3mm |
| Diagonal - +/- .020" / 0.5mm | |
| Equipment | |
| - Coil Car | |
| - Uncoiler | Double cone type |
| With snubber roll | |
| Hydraulic expansion | |
| Hydraulic sliding base | |
| - Snubber Roll | With coil opener |
| - Pinch Roll & Rough Leveler | |
| - Loop Table | |
| - Pinch Roll | |
| - Side Guide | |
| - Side Trimmer | |
| - Scrap Winder | |
| - Hump Table | |
| - Side Guide | |
| - Feeder Roll with Measuring Roll | |
| - Shear | Flying die set |
| - Reject Conveyor | |
| - Finishing Leveler | |
| - Run Out Conveyor | |
| - Pass Conveyor | |
| - #1 Piler | |
| - Passover Conveyor | |
| - #2 Piler | |
| - Hydraulic & Pneumatic Equipment | |
| - Electrical Panels | |
| Sold "as is, where is" installed and in operation. | |
| Very few hours of operation. |
PO Box 1164
Roxboro, NC 27573
+1 336 597 2370
+1 336 597 8633
sales@phippsMetals.com
Asset Sales and Marketing Software for Used and Surplus Industrial Machinery and Equipment Dealers