| Specification | Description |
|---|---|
| Manufacturer | Daehwa, 1989 |
| Strip Thickness | 1.2 - 6.0mm / .047 - .236" |
| Strip Width | 1580mm max / 62.2" |
| Coil Size | ID - 508,610,762mm / 20-24-30" |
| OD - 2000mm max / 78.7" | |
| Wt - 25 mtons max / 55,000lbs | |
| Line Speed | 60 mpm max / 196 fpm |
| Material Processed | Hot rolled steel |
| 65 kg/cm2 tensile | |
| Cut Sheet Length | 3700mm max / 145" |
| Equipment | |
| - Uncoiler | Coen type, hyd expansion |
| coil car | |
| - Coil Feedup | 3.7kW powered roll with |
| hydraulic pressure | |
| - Rough Leveler | Pinch rolls |
| 4-Hi leveler | |
| Five work rolls - 165 mm diam | |
| x 1750 mm face | |
| - Shear | Up-cut hyd type with scrap car |
| - Loop Table | Pinch rolls and side guides |
| - Slitter | 230mmdiam x 1600mm face arbors |
| 90 kW DC drive, scrap winder, | |
| loop table | |
| - Recoiler | Hyd. expanding mandrel |
| 110 kW DC drive | |
| Coil car | |
| - Shear | Up-cut type |
| - Table Conveyor | |
| - Finish Leveler | 4-Hi, 90 kW AC drive |
| 11 work rolls - 90mm diam x | |
| 1600mm face | |
| 26 backup rolls - 100mm diam x | |
| 300mm face | |
| - Conveyor | |
| - Pilers (2) | 2000mm wide x 3700mm long |
| Sold "as is, where is" installed and under power. |
PO Box 1164
Roxboro, NC 27573
+1 336 597 2370
+1 336 597 8633
sales@phippsMetals.com