| Specification | Description |
|---|---|
| Manufacture | Danieli Breda / Cometal / 1993 |
| Billet Size | 178mm diam x 800 - 830mm L |
| 7" diam x 31.5 - 32.7" L | |
| Equipment | |
| - Log Heater | Gas fired, 3 zones |
| - Hot Log Shear | Can cut to specific lengths |
| for better productivity | |
| and reduced scrap | |
| - Press | 4-column, PLC controlled |
| Brueninghaus vari. vol. pumps | |
| 14 second dead cycle | |
| Roto station die changer | |
| 2 electric die heaters | |
| - Quench System | Combination water and air |
| - Double Puller | With movable saw - 25.5-47.5m |
| - Runout Table | 47.5 meters long |
| - Cooling Tables | Initial - 500mm x 50m L |
| Cooling zone - 3500mm x 50m L | |
| - Transfer Table to Stretcher | 1350mm wide |
| - Stretcher | 2400mm movement |
| - Transfer Table to Finishing Saw | 1000mm wide |
| - Finish Saw | Vertical, 8000mm max cut width |
| Variable speed control | |
| - Automatic Stacker | |
| - Ageing Oven | Gas fired, 8 rack capacity |
| Sold "as is, where is" installed, Europe. |
PO Box 1164
Roxboro, NC 27573
+1 336 597 2370
+1 336 597 8633
sales@phippsMetals.com