| Specification | Description |
|---|---|
| Manufacture | DeMag Hydraulik / 1971 |
| Upgraded | 1993-1994 |
| Actual Extrusion History | |
| - Round Tube | 60mm diam x 5mm wall thickness |
| 39mm diam x 2.5mm wall thick. | |
| - Bars | Various profiles |
| - Bars - Hexagonal | OK28/17 and OK31/21 |
| - Bars - Square | 20mm and 29mm |
| - Bars - Rectangular | 150 - 800 mm2 cross-sections |
| Extrusion Lengths | 18,000mm max |
| Production Rate | 40-60 pieces/hr approximate |
| Energy Requirements | |
| - Electrical | 380V / 3 pahse / 50 Hz |
| 36,123 kW total connected load | |
| - Compressed Air | 0.5 MPA, 3 NM3/hr |
| - Cooling Water | 0.5 MPA @ 33 deg C max |
| 42 NM3/hr | |
| Equipment | |
| - Induction Billet Heater | 950 deg C max, 24,000 kW |
| - Press | Direct and indirect |
| 4-column B type construction | |
| - Pumps | 3, 200 kW motor |
| 480 litre/min flow at 25 MPA | |
| - Quench | 14 cooling fans |
| - Runout | 20 m L x 3.6 m W |
| Stores 43 profiles | |
| - Saw | Included |
| - Exit Equipment | There is no coiler or packing |
| station. Plant used a crane & | |
| special baskets to carry | |
| product away from the line. | |
| Sold "as is, where is" installed and under power. | |
| We can provide disassembly, re-installtion, commissioning. |
PO Box 1164
Roxboro, NC 27573
+1 336 597 2370
+1 336 597 8633
sales@phippsMetals.com
Asset Sales and Marketing Software for Used and Surplus Industrial Machinery and Equipment Dealers