| Specification | Description |
|---|---|
| Manufacture | SMS / 1981 |
| Model | 53.11113 |
| Billet Size | 170mm diam / 6.69" |
| Extrusion Speed | Variable up to 48mm/second |
| Equipment | |
| - Billet Heater | Junkers induction type |
| 2080KVA, 1700kW | |
| - Saw | Mounted on front platen |
| - Press | Double die rotating system |
| 140 - 250mm diam container | |
| 35 KVA container heater | |
| 850mm diameter main ram | |
| 1520mm max stem stroke | |
| - Piercing Mandrel | 360mm diam x 750mm stroke |
| - Pumps | Two fixed pumps |
| - 480 liters/min at 250 bar | |
| - 160kW motors | |
| Two Variable Pumps | |
| - 0-480 liters/min at 250 bar | |
| - 160kW motors | |
| Recirculation Pump | |
| Pressure Holding Pump | |
| - Runout Table | 22m roller conveyor to hot saw |
| 26m roller conveyor from saw | |
| to transfer table | |
| - Cooling Table | 24m x 3.5m walking beam type |
| - Transfer Table to Finishing Saw | 24 meters |
| - Finishing Saw | Included |
| - Exit Roller Conveyor | 19m long |
| Variable cut-to-length stop | |
| Sold "as is, where is" installed. |
PO Box 1164
Roxboro, NC 27573
+1 336 597 2370
+1 336 597 8633
sales@phippsMetals.com