| Specification | Description |
|---|---|
| Manufacturer | Clecim |
| 1987 with many upgrades | |
| Billet Size | 8" diam x 33" max length |
| Equipment | |
| - Log Heater | Granco-Clark, new 1992 |
| 8" x 288" max log size | |
| 11,700 lbs/hr capacity | |
| Auto loading from 10-log table | |
| - Hot Log Shear | Granco-Clark, new 1992 |
| 10 - 36" variable cut length | |
| Automatic log end saving | |
| Discard chute | |
| - Billet Loader | 21 - 36" billet capability |
| Auto. handles 2-end billets | |
| - Extrusion Press | |
| - Design | Horizontal, direct,4-column |
| hydraulic, short stroke | |
| - Container Included | 8" |
| - Die Shuttle | |
| - Max. Hydraulic Pressure | 32 psi |
| - Pumps | Brueninghaus AVSO-250-HS |
| - Main Motors | 250 hp |
| - PLC | Allen Bradley RS Logic 5 & 500 |
| - Auto Shear Lubrication | |
| - Electrics | 460 V / 3 phase / 60 Hz |
| - Fire Protection System | Fenawalt 6000, new in 2008 |
| 12 x 342 ml CO2 cylinders | |
| - Quench System | Standing wave type |
| 3 cooling towers / 15 ft long | |
| - Hot Saw | OMAV, moving type |
| 3ft of travel. auto clamp, cut | |
| Swarf extraction | |
| - Puller | Clecim, 200 ft max |
| - Runout Table | Non-driven roller type |
| 200 ft long | |
| Kevlar covered rolls | |
| Under table ventilation | |
| - Walking Beam Cooling Table | Under table fans |
| - Stretcher | 25 ton |
| Stretch - min 40 ft, max 200ft | |
| 2 man operation | |
| - Batching Belts & Saw Infeed Conveyor | |
| - Finish Cut-to-Length Saw | Clecim |
| 3.5 ft table width | |
| 8" max saw opening | |
| - Aging Oven | Gerref |
| Gas fired | |
| 5000 lbs/hr through put | |
| Longitudinal air flow | |
| Sold "as is, where is" installed |
PO Box 1164
Roxboro, NC 27573
+1 336 597 2370
+1 336 597 8633
sales@phippsMetals.com