| Specification | Description |
|---|---|
| Manufacture | Blaw Knox / 1968 |
| Mill Type / Use | "Universal" = intermediate and |
| finishing mill | |
| Strip Width | Max - 58" / 1473mm |
| Min - 35" / 880mm | |
| Strip Thickness | 0.152 - .018mm / .006 - .0007" |
| Line Speed | 685 mpm / 2247 fpm |
| Coil Size | ID - 315 mm |
| OD - 925mm / 36.4" | |
| Drum length - 1350mm | |
| Weight - 2000 kg max / 4408lbs | |
| Equipment | |
| - Uncoiler | 2x30kw Westinghouse DC motors |
| 240V, 450/1800 rpm | |
| - Mill | |
| - Controls | PLC |
| - Main Mill Drive | 375 kW DC motor |
| 700 V, 300/900 rpm | |
| - Rolling Force | 560 mtons total |
| - Work Rolls | 241mm diam x 1625mm face |
| 241.3mm new, 222.25mm min | |
| 10 pair available, 1set chocks | |
| - Backup Rolls | 660mm diam x 1625mm face |
| 660.4mm new, 602.25mm min | |
| 2 pair available, 1 set chocks | |
| - AGC | 508mm diam hydraulic cylinder |
| 2000 PSI, 60hp gear motor | |
| FAG(mod FH46ME)thickness gauge | |
| - Roll Coolant / Filtration System | 1135 L/min max flow |
| Hidromation HV 85-200 system | |
| - Fume Exhaust System | Hood and system included |
| - Fire Suppression System | Hi-pressureCO2 system included |
| - Recoiler | 2 x 30kW DC motors |
| 240V, 450/1800 rpm | |
| - Electrics | Complete, Westinghouse |
| - Hydraulics | Complete, 25hp |
| 2000psi, 550 gal system | |
| - Spools | 100 included |
| Sold "as is, where is" installed, under power. |
PO Box 1164
Roxboro, NC 27573
+1 336 597 2370
+1 336 597 8633
sales@phippsMetals.com
Asset Sales and Marketing Software for Used and Surplus Industrial Machinery and Equipment Dealers