| Specification | Description |
|---|---|
| Manufacturer | Spidem |
| Web Thickness | |
| - Entry Maximum - Doubled | 0.025mm / .001" |
| - Exit Minimum - Doubled | 0.0045mm / .00018" |
| Web Width | 1080mm max / 42.5" |
| Coil Size | ID - 315mm x 1220mm spools |
| OD - 1100mm max / 43.3" | |
| Line Speed | 520 mpm max / 1700 fpm |
| Equipment | |
| - Mill Drive | 200 hp |
| 800/2000 rpm | |
| SCR DC drive | |
| - Work Rolls | 165mm diam x 1186mm face |
| (6.5" diam x 46.7" face) | |
| - Backup Rolls | 400mm diam x 1200mm face |
| (15.7" diam x 472." face) | |
| - Coolant System | 300 lpm |
| Complete mill ready for operation. | |
| Sold "as is, where is" installed, not in operation. |
PO Box 1164
Roxboro, NC 27573
+1 336 597 2370
+1 336 597 8633
sales@phippsMetals.com