| Specification | Description |
|---|---|
| Manufacturer | Achenbach / 1965 |
| Line Speed | 220 - 600 mpm / 722 - 1968 fpm |
| Strip Thickness | Entry - 1.2 mm max for 1xxx |
| Exit - 0.1 mm min | |
| Strip Width | 600 - 1600mm / 23.6 - 63" |
| Coil Size | ID - 300 & 260mm spools |
| - 11.8" & 10.2" spools | |
| OD - 1225 mm max / 48" | |
| Weight - 4.5 mton / 9918 lbs | |
| ( or 3 kg/mm of strip max) | |
| Separating Force | 400 mtons max / 881,000 lbs |
| Equipment | |
| - Uncoiler | Cone type |
| 200 kW DC drive | |
| 200 - 2400 kg tension | |
| - Mill | |
| - Drive | 500 kW, 250/680 rpm DC motor |
| - Work Rolls | 280mm diam x 1700mm face |
| (11" diam x 66.9" face) | |
| Roller bearings | |
| - Backup Rolls | 650mm diam x 1700mm face |
| (25.5" diam x 66.9" face) | |
| - Coolant System | Achenbach "Superstack" filter |
| 1400 litres/min | |
| Model M04-10-1400 | |
| - AGC System | Gap & speed controls |
| FAH gauge | |
| - Rolling Force | 2x4 cylinders @ 200atmospheres |
| - Recoiler | Cone type |
| 240 kW, 187/765 rpm DC drive | |
| 150 - 2000 kg tension | |
| - DC Power Systems | MG sets |
| Sold "as is, where is" installed, not in production. |
PO Box 1164
Roxboro, NC 27573
+1 336 597 2370
+1 336 597 8633
sales@phippsMetals.com