Request A Quote On This Item| Specification | Description |
|---|---|
| Manufacture | Hunter / 1072 |
| Revamped in 1994 & 2004 | |
| Line Speed | 800 mpm max rated / 2624 fpm |
| 400 mpm actual use max | |
| Strip Thickness | Max Entry - 0.6mm / .024" |
| Min Exit - 2 x 8microns or | |
| 2 x .00031" | |
| Strip Width | 1600mm max / 63" |
| Coil Size | ID - 600mm / 23.6" |
| OD - 1700mm max / 66.9" | |
| Weight-7.5mtons max / 16,500lb | |
| Equipment | |
| - Doubling Uncoilers | Entry coil ramp |
| Coil car | |
| 37 kW DC motors | |
| 2-speed gear reducer | |
| Oil spray system | |
| - Work Rolls | 305mm diam x 1680mm face |
| 12" diam x 66" face | |
| - Backup Rolls | 760mm diam / 29.9" |
| - Mill Drive | 750 hp |
| - Auto Gauge Control | AccuRay 5000, 350 - 15 microns |
| - Coolant System | |
| - CO2 Fire Suppression System | |
| - Hood System | |
| - Recoiler | More detail coming |
| - Spare Rolls | Several rolls chocks bearings |
| Sold "as is, where is" installed, not in operation since 2009. |
PO Box 1164
Roxboro, NC 27573
+1 336 597 2370
+1 336 597 8633
sales@phippsMetals.com