| Specification | Description |
|---|---|
| Manufacturer | Schmutz / 1974 |
| Web Thickness | |
| - Maximum | 25 microns doubled / .0098"d |
| - Minimum | 5 microns doubled / .0002"d |
| - Typical Use | 6 - 15 microns doubled / |
| .00024"d - .00059"d | |
| Web Width | Entry - 1560mm / 61.4" |
| Exit - 1530mm / 60.2" | |
| Uncoiler | 1750mm max OD / 68.9" |
| 16 kW motor | |
| Uncoiler Steel Spools | With conical take-up / sizes : |
| - 599mmID / 665mm OD / 1850mm | |
| - 599mmID / 665mm OD / 2100mm | |
| Recoiler | Vertical expandinig mandrel |
| 2 x 8 kW motors | |
| OD - 760mm max / 29.9" | |
| Recoiler Steel Spools | ID - 70, 76, 150mm |
| Face - 1650mm / 65" | |
| Number of Cuts | 5 max. (6 edge trim suction |
| nozzles per winder) | |
| Edge trim with razor blades | |
| Edge movement by chopper fan | |
| Machine Speed | 800 mpm max |
| 600 mpm usual | |
| Coil Handling at Recoiler | Manual crane coil change |
| 1 coil staging table w/ weight | |
| scale & spool pull-out device | |
| Common with Kampf 1500 system | |
| Welding | Ultrasonic system |
| Sold "as is, where is" installed, under power, not in operation. |
PO Box 1164
Roxboro, NC 27573
+1 336 597 2370
+1 336 597 8633
sales@phippsMetals.com