Request A Quote On This Item| Specification | Description |
|---|---|
| Manufacturer | Kampf / 1968 |
| 1998 = refurb & new electrics | |
| with new drive & PLC | |
| Web Thickness | Max - 2 x 20 microns / .00078" |
| Min - 2 x 5 microns / .00020" | |
| Web Width | Entry - 1600mm max / 63" |
| Exit - 1550mm max / 61" | |
| Line Speed | Max - 800mpm (on 12micron web) |
| Typical use = 600 mpm | |
| Unwind | 1750mm max diameter |
| 37.5 kW motor | |
| Unwind Spools | Steel spools, conical take-up |
| - 559mm ID / 665mm OD / 1850mm | |
| - 559mm ID / 665mm OD / 2100mm | |
| Rewind | Horizontal type system |
| 800mm max finished coil diam. | |
| 2 x 10 kW motors | |
| Recoiler | On expanding mandrel |
| Recoiler Spools | Steel spools / 1650mm max face |
| 70mm, 76mm, 150mm ID | |
| Cuts | -Number of cuts - 2 |
| -3 edge trim suction nozzles | |
| -Edge trim with razor blade or | |
| circular knife | |
| -Edge trim removed=chopper fan | |
| Welding | Ultrasonic welder |
| Rewind Handling System | Manual crane coil change |
| One coil deposit table for | |
| weighing and spool extraction | |
| Safety Booth Enclosure | Included |
| Sold "as is, where is." Dismantled and in dry storage Feb 2011. |
PO Box 1164
Roxboro, NC 27573
+1 336 597 2370
+1 336 597 8633
sales@phippsMetals.com