Request A Quote On This Item| Specification | Description |
|---|---|
| Manufacturer | Kampf / 1967 |
| Refurbished in 1994 | |
| New finished coil table 1997 | |
| System Type | Horizontal type |
| Web Width | Entry - 1100mm max |
| Exit - 1070mm max | |
| Web Thickness | Slitting: 40 - 220 microns |
| Separating: 2 x 20-50 microns | |
| Uncoiler | 1150mm max OD |
| 3 mton coil weight max | |
| Uncoiler Steel Spools | With conical take-up / sizes : |
| 221mm ID/254mm OD/1220mm face | |
| Finished Coil Diameter | 1150mm max |
| Recoiler | Expandable mandrel |
| Steel or cardboard cores | |
| 70/120/150mm ID's | |
| 1180mm max core length | |
| Cut | 44 cuts max |
| 22 cuts normal operation | |
| Scissor type rotary knives | |
| Edge moving by chopper fan | |
| Speed | 500 mpm max |
| 200 mpm normal operation | |
| Complete With | Hydraulic system |
| Ultrasonic welding | |
| Rewind handling with : | |
| - manual crane | |
| - coil deposit table | |
| - weighing device | |
| - spool pull-out device | |
| - air mandrels | |
| Sold "as is, where is" installed, not in operation. |
PO Box 1164
Roxboro, NC 27573
+1 336 597 2370
+1 336 597 8633
sales@phippsMetals.com