| Specification | Description |
|---|---|
| Manufacture | Lake Erie / 1957 |
| - With continuous upgrades and | |
| excellent maintenance. | |
| - Press shut down in running | |
| condition. | |
| Hydraulic Capacity | 3500 US tons @ 5000psi |
| (3176 mtons @ 340 bars) | |
| Description | - Horizontal configuration |
| - Hot or cold slug impacting | |
| - Makes lrg fire extinguisher, | |
| scuba, medical bottles, etc | |
| Cylinder Diameter | 9.8" / 248mm max. |
| Production/Product Capacities | 140 to 300 cylinders/hr |
| - Press Cycle Time | 10 sec for smallest slug |
| 25 sec for the largest slug | |
| - Slug Diameter | 9.8" max / 249mm |
| - Slug Length | 12.35" max / 311mm |
| - Extruded Cup Length | 55.5" max / 1409mm |
| - Alloys Run | 6061and 7032 |
| Equipment | |
| - Press | |
| - Stroke | 108" / 2743mm |
| - Working Pressure | 5000 psi / 340 bars |
| - Main Ram | 40" diameter / 1016mm |
| - Oil Capacity | 4335 gallons |
| - Hydraulic Pumps | 10 (each=150hp drives,35gpm) |
| - Handling Equipment | Entry system for slugs |
| Exit system for cylinders | |
| - Controls | A.B. 505 PLC (new 2000) |
| - Main Switch Gear | A.B. / WEG (new 2002) |
| - Press Footprint | 46 ft L x 23 ft W x 17 ft H |
| (14m L x 7m W x 5.2m H) | |
| - Approximate Weight | 600 US tons / 544 mtons |
| Also Available | Slug sawing system |
| Cylinder test equipment | |
| Sold "as is, where is" installed. |
PO Box 1164
Roxboro, NC 27573
+1 336 597 2370
+1 336 597 8633
sales@phippsMetals.com
Asset Sales and Marketing Software for Used and Surplus Industrial Machinery and Equipment Dealers