Request A Quote On This Item| Specification | Description |
|---|---|
| Can Diameter Range | 45 - 66mm / 1.77 - 2.59" |
| Can Finished Length Range | 95 - 240mm / 3.74 - 9.44" |
| Process Speed | 70 cans per minute |
| Limited by the extrusion press | |
| Rest of the line = 100 cpm | |
| Equipment | |
| - Impact Extrusion Press | Herlan P10 |
| Slug elevator and lubricator | |
| - Trimmer & Brush Unit | SBM |
| - Washer | "Home made" |
| - Internal Lacquerer | by Sprimag |
| - Internal Lacquer Oven | by AISA/DIT |
| - Accumulator | |
| - Base Coater and Oven | |
| - Printing Machine | Polytype VIM |
| 6 colors with oven | |
| - Top Varnish Machine & Oven | |
| - Necker | Guzzi GR-65, 24 stations |
| - Packing Machine | |
| - Tooling | 45mm diam included |
| Electrics | 400 V / 3 phase / 50 Hz |
| 550 kW connected load approx. | |
| Sold "as is, where is" installed and under power. |
PO Box 1164
Roxboro, NC 27573
+1 336 597 2370
+1 336 597 8633
sales@phippsMetals.com