| Specification | Description |
|---|---|
| Manufacture | Swindell-Dressler / 1973 |
| Line Speed | 400 fpm max / 122 mpm |
| Strip Thickness | .018 - .084" / 0.46-2.13mm |
| Strip Width | 24 - 55" / 610 - 1397mm |
| Coil Size | ID uncoiler - 24" / 610mm |
| ID recoiler - 20" / 508mm | |
| OD both - 77" max / 1956mm | |
| Weight Capacity | 22,500 lbs max / 10.1mton |
| Strip Temperature (775 deg F) | 980deg F air temp + 400fpm + |
| typical product = 775 deg F | |
| Equipment | |
| - Uncoiler | With coil car, hold down roll |
| - Pinch Roll | With 3-roll flattener |
| - Entry Shear | |
| - Strip Joiner | |
| - Entry Bridle | 4-roll, 30" diam rolls |
| - High Velocity Annealing Furnace | |
| - 3 heating zones | |
| - 6,000,000 BTU/hr heat input per zone (approx) | |
| - 650 hp drive | |
| - 90,000 CFM recirculating fan each zone | |
| - 1,000 deg F max air temperature | |
| - Cooling Zone | |
| - Exit Bridle | 2-roll, 30" diameter rolls |
| - Exit Shear | |
| - Recoiler | With belt wrapper, coil car, |
| hold down roll | |
| Sold "as is, where is" installed, North America |
PO Box 1164
Roxboro, NC 27573
+1 336 597 2370
+1 336 597 8633
sales@phippsMetals.com
Asset Sales and Marketing Software for Used and Surplus Industrial Machinery and Equipment Dealers