| Specification | Description |
|---|---|
| Manufacture | Glasstech / 1980 |
| Design | |
| - To temper glass to meet ANSI Z-97.1-1975 | |
| - To heat-strengthen glass | |
| - To produce finished glass with max bow/warp as follows: | |
| - 0 - 36" length = 1/16" max bow | |
| - 60 - 72" length = 3/16" max bow | |
| - 96 - 108" length = 3/8" max bow | |
| Glass Size Capacity | |
| - 84" wide x 160" max length in 1/4" or 3/16" thickness | |
| - 45 sheets per hour (based on 1/4" thick full size sheets) | |
| Equipment | |
| - Zones | Eight upper zones |
| Two lower zones | |
| - Heat Source | 2200 kW electrical heat input |
| - Furnace Length | 60 ft |
| - Inside Width | 82" nominal, 84" max |
| - Roller Hearth Drive | Constant speed DC |
| - Furnace Rolls | Ceramic (some spares included) |
| - Tables | Load |
| Unload | |
| Quench | |
| - Computer Controls | Temp, speed, etc. |
| - Quench Fans | Two 125hp motors |
| Sold "as is, where is" installed, not in operation, USA. |
PO Box 1164
Roxboro, NC 27573
+1 336 597 2370
+1 336 597 8633
sales@phippsMetals.com
Asset Sales and Marketing Software for Used and Surplus Industrial Machinery and Equipment Dealers