| Specification | Description |
|---|---|
| Manufacture | Sanken Sangyo Co. (Japan) |
| 1987 | |
| Roller Hearth Function | Furnace heats aluminum wheel |
| blanks to 520 C then quenches | |
| in 25 seconds or less to reach | |
| T4 condition. | |
| Aging Oven Function | Then the aging oven ages the |
| blanks to T6 condition @ 150C. | |
| Production Rate | 709 - 1002 kg/hr of aluminum |
| (15" wheels at 12kg each on | |
| skids of 30 wheels each) | |
| Equipment | |
| - Solution Heat Treat Furnace | LP gas fired |
| - Internal Dimension | 23,295mmL x3200mmW x 5950mmH |
| - Preheat Zone Burner | 250,000 Kcal/hr |
| - Three (3) Soak Zone Burners | 62,500 Kcal/hr |
| - Preheat Zone Recirculation Fans | One set, 500 m3/min, 11kW |
| - Soak Zone Recirculation Fans | 4 sets, 750 m3/min, 15kW |
| - Aging Oven | LP gas fired |
| - Internal Dimensions | 15,530mmL x 3100mmW x 5150mmH |
| - Preheat Zone Recirculation Fans | 2 sets, 500m3/min, 7.5kW |
| - Soak Zone Recirculation Fans | 2 sets, 750 m3/min, 11kW |
| - Preheat Zone Burner | One set, 125,000 Kcal/hr |
| - Soak Zone Burners | 3 sets, 31,500 Kcal/hr |
| - Quench Tank | One burner, 250,000 Kcal/hr |
| - Product Trays | 970mmL x 1500mmW x 1500mmH |
| - Roller Hearth Drive | 32 - 45 mm/min variable |
| Sold "as is, where is" installed. |
PO Box 1164
Roxboro, NC 27573
+1 336 597 2370
+1 336 597 8633
sales@phippsMetals.com
Asset Sales and Marketing Software for Used and Surplus Industrial Machinery and Equipment Dealers