| Specification | Description |
|---|---|
| Manufacture | MetForm / 1984 |
| Capacity | 400 mton / 881,600 lbs |
| Prior Use (5xxx alloys) | Alum. computer disc blanking |
| Strip Thickness | 6.0mm max / .236" |
| Press Speed | 7 strokes/min fixed rate |
| 3 blanks per stroke | |
| Incoming Coil Size | ID - 600m / 23.6" |
| OD - 1500mm max / 59" | |
| Weight- 6.0 mton max/13,224lbs | |
| Width - 1100mm max / 43.3" | |
| Stroke | 250mm fixed / 9.84" |
| 200mm ram adjust / 7.87" | |
| Shut Height | 400mm / 15.75" |
| Ram Adjustment | 200mm / 7.87" |
| Press Window Opening | 1600mm left to right |
| 1400mm front to back | |
| Press Drive | 22 kW, 1500rpm synchronous |
| Equipment | |
| - Entry Coil Car | |
| - Uncoiler | Mandrel type |
| - Peeler | |
| - Loop Controls | |
| - Flattener | 9-roll unit |
| - Roll Feed System | |
| - Blanking Press | |
| - Exit Roll Feed | |
| - Scrap Shear | With scrap conveyor |
| - Packaging Conveyor | |
| - Vacuum Unloader | |
| - All Support Systems and Equipment | Hydraulic |
| Electric | |
| Pneumatic | |
| Sold "as is, where is" off foundation, in dry storage. |
PO Box 1164
Roxboro, NC 27573
+1 336 597 2370
+1 336 597 8633
sales@phippsMetals.com