| Specification | Description |
|---|---|
| Manufacture | Newell-Dunford, 1989 |
| Design Data | |
| - Throughput | 3 mton/hr - 6600lbs/hr |
| Based on: | |
| - 5% contaminant content | |
| - 630-700 deg C gas temp range | |
| - 400-450 deg C exit metal tem | |
| - Shredded Scrap Size | 40 - 50 mm nominal size |
| Not to exceeed 90 mm | |
| 150 - 300 kg/cubic meter | |
| bulk density | |
| Equipment | |
| - Steel Belt Feed Conveyor | |
| - Rotary Horizontal Kiln | 2000mm diam x 8000mm long |
| 79" diam x 315" long | |
| Double flap design | |
| - Drive | 0.3 - 4 rpm rotation |
| - Afterburner | Nat gas fired with |
| heavy oil backup fuel | |
| Recirculating fans | |
| - Air Emissions Control Equipment | Multi-cyclone and scrubber |
| - Electrics | 380 volt / 3 phase / 50 Hz |
| - Melting Furnace | 1989, 20 mton hold capacity |
| 3 mton/hr melt rate | |
| 130 N cubic meter/hr gas use | |
| Sold "as is, where is" installed. |
PO Box 1164
Roxboro, NC 27573
+1 336 597 2370
+1 336 597 8633
sales@phippsMetals.com