| Specification | Description |
|---|---|
| Manufacture | Wagner / 1981 |
| Model | WKLM 1800 |
| Incoming Slab Size | |
| - Thickness | 450 - 610mm / 17.7 - 24" |
| - Width | 1500 - 2400mm / 59 - 94.4" |
| - Length | 1500 - 7000mm / 59 - 275" |
| Cut Slab Length | 200 - 5000mm / 8 - 196" |
| Slab End Cuts | 200 - 500mm / 8 - 19.6" |
| Sawing Rate | 5000cm -or- 775inches square |
| Saw Blade | 1870mm diam (73.6") |
| With 100mm center hole | |
| Saw Drive | 175 kW / 236 hp |
| Equipment | |
| - In-Feed Roller Table | 7500mm long x 3200mm wide |
| (24.6 ft long x 10.5 ft wide) | |
| - Saw | |
| - Chip Collection System | With cyclone and swarf baler |
| - Exit Roller Table | 6300mm long / 20.7 ft |
| - Measuring Device | |
| - Hydraulic System | |
| - Electrics | 380V / 50Hz / 220 V controls |
| Sold "as is, where is" installed and in operation thru March 2008. |
PO Box 1164
Roxboro, NC 27573
+1 336 597 2370
+1 336 597 8633
sales@phippsMetals.com
Asset Sales and Marketing Software for Used and Surplus Industrial Machinery and Equipment Dealers