| Specification | Description |
|---|---|
| Manufacture | S.I.B. - Italy / 1999 |
| Nominal Capacity | 2 mtons/hr max. |
| Incoming Material | Aluminum turnings, etc. |
| Max water content of 10% | |
| Max oil content of 6% | |
| Energy Requirements | Nat. gas - 300Nm3/hr at 200bar |
| Electric - 70kW, 380V, 50Hz | |
| Equipment | |
| - Charging Conveyor | 600mm wide x 12 meters long |
| 50mm high side walls | |
| - Heating Chamber | 1200 Mcal/hr burners |
| Oxygen analyser | |
| Gas/air ratio adjustment | |
| - Kiln | 2000mm diam x 12,700mm length |
| Made from 12.7mm Corten B | |
| Hopper | |
| Charge & discharge systems | |
| - Afterburner | 1350 deg C design |
| 1200 deg C operating temp | |
| 44% alumina lining | |
| - Heat Recovery | |
| - Magnetic Separators | 2 drums with vibratory feeder |
| Sold "as is, where is" installed. |
PO Box 1164
Roxboro, NC 27573
+1 336 597 2370
+1 336 597 8633
sales@phippsMetals.com