| Specification | Description |
|---|---|
| Manufacturer | Pechiney / SCAL |
| New 1984, decommissioned 2004 | |
| Cast Strip Thickness | 6.0 - 10.0 mm / .236 - .397" |
| Cast Width | 900 - 1650mm / 35.4 - 65" |
| Cast Coil Size | ID - 600mm / 23.6" |
| OD - 1820mm max / 71.6" | |
| Weight - 6.1 kg/mm of width | |
| (13.4 lbs/inch) | |
| Previous Use | Aluminum foil alloys |
| 1xxx and 8xxx series | |
| 1.25mton/hr per meter of width | |
| Equipment | |
| - Tilting Melting Furnace (1) | Gautschi |
| 25 mton capacity | |
| Two oil-fired burners, 2235kW | |
| - Tilting Holding Furnaces (2) | 15MT (31,000lbs) capacity each |
| Electrically heated | |
| 240 kW per furnace | |
| - Grain Refiner Feeder | AlTi5B coiled rod |
| - Degassing and Filtration | In-line molten metal unit |
| Nitrogen and argon plus | |
| Double ceramic foam filter | |
| - Caster | |
| - Rolls | Diameter - 620mm / 24.4" |
| Face - 1750mm / 68.9" | |
| 8 rolls included total | |
| Many new components on rolls | |
| - Chocks and Bearings | 2 complete sets total |
| - Shear | |
| - Coiler | |
| - Hydraulics | |
| - Drive | 30 kW |
| - Cooling water system for rolls | |
| - Caster Tip Shop Equipment | Included |
| Sold "as is, where is" installed, not in production at this time. |
PO Box 1164
Roxboro, NC 27573
+1 336 597 2370
+1 336 597 8633
sales@phippsMetals.com