Request A Quote On This Item| Specification | Description |
|---|---|
| Manufacture | Tardis (JMC Recycling) |
| Model | 1048 |
| Ram | Single hydraulic cylinder |
| - Process | |
| 1. Dross is taken from melting furnace into dross pot | |
| 2. Hydraulic ram presses dross to free molten aluminum | |
| 3. Dross pot has a drain hole where molten aluminum "pours" | |
| 4. Draining aluminum pours into a sow mold beneath & solidifies | |
| 5. Sow can now be immediately charged back to melting furnace | |
| 6. Dross left in pot is cooled by ram to prevent further | |
| oxidation to what aluminum remains | |
| 7. Compacted dross has higher value to a reclaiming company | |
| because it is handled easily and stores compactly. | |
| - Dross Pots / Sow Molds | |
| - Count | 2 sets included |
| - Capacity (at dross pot) | 350 kg / 770 lbs |
| - Dross Pot Diameter | 1100mm / 43.3" |
| - Pot/Mold Set Height | 730mm / 28.7" overall as |
| stacked in operational mode | |
| - Ceramic Air Emissions Filter | Missing but a new one can be |
| supplied at extra cost | |
| - Tool Kit | Included |
| - Documentation | INcluded |
| - Condition | |
| - This is a used unit that will be thoroughly reconditioned by | |
| the original manufacturer | |
| Sold EXW reconditioned with 6-month warranty. | |
| 8-9 week lead time required | |
| 25% deposit required with order |
PO Box 1164
Roxboro, NC 27573
+1 336 597 2370
+1 336 597 8633
sales@phippsMetals.com