Request A Quote On This Item| Specification | Description |
|---|---|
| Manufacture | Hunter / 1976 |
| Upgrades in 1985 and 1988 | |
| Cast Strip Width | 1680mm / 66" maximum |
| Cast Strip Thickness | 6 - 10mm / .236 - .394" |
| Casting Rate | 1.78 mpm max (5.83 fpm) or |
| +/-2.0 mtons/hr at 1680mm | |
| Cast Coil Size | ID - |
| OD - | |
| Weight - | |
| Production Capacity | 12,000 mtons/yr nominal and |
| depending on width mix, etc. | |
| Equipment | |
| - Melting Furnace | |
| - Molten Capacity | 25 mtons |
| - Burners | by Bloom |
| 2 million kCal/hr total input | |
| Combustion air preheat system | |
| - Design | Stationary with tap hole |
| - Molten Transfer Rate | 2.3 mtons/hr |
| - Holding Furnace | |
| - Molten Capacity | 10 mtons |
| - Burners | Bloom |
| - Design | Stationary with tap hole |
| - Molten Metal Transfer | Gautschi, complete with it's |
| own burner system | |
| - Tip Table | Servo motors with transducers |
| for precision tip positioning | |
| - Caster | |
| - Twin-Rolls | 640mm diam, water cooled |
| - Design | 15 deg back tilt |
| - Drive System | Independent drive for ea. roll |
| 2 planetary gear reducers | |
| 2 hydraulic motors | |
| - Roll Spray System | Included |
| - Pinch Rolls | Included |
| - Crop Shear | Included |
| - Coiler | 610mm diameter / 24" |
| Spares | Total for all 3 casters = |
| 22 roll assemblies | |
| Misc. extra chocks, cores, | |
| shells, and gear boxes | |
| Sold "as is, where is" installed, not in operation since 2009. |
PO Box 1164
Roxboro, NC 27573
+1 336 597 2370
+1 336 597 8633
sales@phippsMetals.com