| Specification | Description |
|---|---|
| Manufacture | Italian make / 1984 |
| Type | Discontinuous |
| Thickness | 30,40,50,60,75,100,150 mm |
| 1.2,1.6,2.0,2.4,3.0,4.0,6.0" | |
| Max Length | 12 meters (39'3") |
| Width | 1000mm (39.4") |
| Output | 600 m2/day at ave. thickness |
| Complete Line Including | |
| - Uncoiler | Manual adjust, unpowered |
| - Roll Former (by OLMA) | 7-stands with guillotine shear |
| For roof upper panel | |
| - Roll Former (by OLMA) | 6-stands with guillotine shear |
| For lower roof & wall panels | |
| - Roll Former (by OLMA) | 6-stands, no shear |
| For flat cold storage panels | |
| - High-Pressure Injection Machine | by OMS, 2 x 300 litre tanks |
| Mixing head | |
| Self-propelled | |
| With control system | |
| - Hydraulic Press | For PUR casting, 12m panels |
| By Manni (Italy) | |
| With hot water heater | |
| - Hydraulic Press | 2 wagons for 7.5m panels |
| By Manni (Italy) | |
| With hot water heater | |
| - Hydraulic Press | By Hoffer, for 3.5m panels |
| - Stacker | Not available |
| Electrics | 400/220 V, 50 Hz |
| Footprint | 1000 m2 |
| Sold "as is, where is" installed, ran until Jan 2005. Can be test run. | |
| It is interesting to know that the line may seem simple but | |
| it is very reliable and has run consistently for 15 years. It has | |
| made good money for the owner and allowed him | |
| to buy a new 1.5 million euro line! |
PO Box 1164
Roxboro, NC 27573
+1 336 597 2370
+1 336 597 8633
sales@phippsMetals.com
Asset Sales and Marketing Software for Used and Surplus Industrial Machinery and Equipment Dealers