| Specification | Description |
|---|---|
| 1995 Equipment (rebuilt 2001) | 7-stand forming mill |
| with 7-stand side roll | |
| 4-stand sizing mill | |
| with 4-stand side roll | |
| 2005/2006 Equipment | |
| - High-Frequency Welding Section | 400kW |
| - Friction Saw Cut-Off Section | and Conveyor |
| - End Facing Section | Or chamfering section |
| - Rotary Looper | Vert. type strip accumulator |
| - Uncoiler/Snubber Roll/Coil Opener | |
| - Side Guide/PinchRoll/Welder | |
| Product Capabilities | |
| - Wall Thickness | 1.4 - 7.0mm / .055 - .276" |
| - Diameters | 15.0 - 76.3mm / .625 - 3.0" |
| Actual Products Produced | Automotive applications |
| 15.9mm diam x 1.4mm wall | |
| 15.9mm diam x 3.2mm wall | |
| 76.3mm diam x 1.4mm wall | |
| 76.3mm diam x 6.5mm wall | |
| Line Speed | 100 mpm max / 328 fpm |
| Equipment | |
| - Uncoiler | w/ snubber roll & coil opener |
| - Side Guide | w/ pinch rolls and welder |
| - Rotary Accumulator | |
| - Forming Stands | |
| - Sizing Stands | |
| - High-Frequency Welder | |
| - Friction Saw | |
| - End Facing / Chamfering | |
| - Forming Rolls | 15 sets, diameters as follows: |
| 15.9-17.3-19.1-22.2-25.4 | |
| 31.8-34.0-38.1-42.7-48.6 | |
| 50.8-60.5-70.0mm | |
| - Pipe Scarfing Tools | 12 sets |
| - Air Compressor | 50hp, new 2005 |
| by Atlas Copco | |
| - Forming Mill Drive Motor | 60kW, 380 Volts |
| Sold "as is, where is" installed and in operation! |
PO Box 1164
Roxboro, NC 27573
+1 336 597 2370
+1 336 597 8633
sales@phippsMetals.com
Asset Sales and Marketing Software for Used and Surplus Industrial Machinery and Equipment Dealers