| Specification | Description |
|---|---|
| Manufacture | Yoder / 1950 |
| Updated 1958 | |
| Model | W 7.5 HF-ERW |
| Diameter Range | 4 - 12.75" / 101.6 - 323.8mm |
| Wall Thickness | .135 - .375" / 3.4 - 9.5mm |
| Available Tooling | 6-5/8" - 8-5/8" / 168mm - 219m |
| 10-3/4" - 12-3/4"/273 - 323mm | |
| Line Speed | 25 fpm max / 7.6 mpm |
| Equipment | |
| - Pinch Roll / Feed Stand | |
| - Edge Trimmer | 12" to 40" widths |
| - Shot Blast System | Cleans both edges |
| of incoming plate | |
| - Forming Section | Yoder W7.5 |
| 4 breakdown passes | |
| 3 horizontal forming stands | |
| - Dual Head Forming Stand | 3 finish passes, with slide-in |
| units for 4-roll forming | |
| - Electric Resistance Welder | 750 kVA |
| - 2-Roll Pressure Stands with Driven Rolls | |
| - Scarfing Units | working ID and OD |
| - Weld Coolant System | |
| - Sizing Stands | 3, with slide-in units for |
| 4-roll forming | |
| - End Facing & Beveling Machine | |
| - Pipe Pressure Testing Machine | Max 2500 psi |
| Sold "as is, where is" installed and in operation (nov 2007) |
PO Box 1164
Roxboro, NC 27573
+1 336 597 2370
+1 336 597 8633
sales@phippsMetals.com
Asset Sales and Marketing Software for Used and Surplus Industrial Machinery and Equipment Dealers