| Specification | Description |
|---|---|
| Manufacture | Hercules WS 350 / 1971 |
| Floor Footprint | 13 m x 3 m |
| Grinding Length Between Centers | 4000 mm / 157.5" |
| Distance Between Centers | 4000 mm / 157.5" |
| 500 mm with new wheel / 19.7" | |
| 700 mm in any case / 27.6" | |
| Steadies Capacity | 340 - 200 mm diam |
| 225 - 100 mm diam | |
| 25 - 130 mm diam | |
| Heaviest Work Piece Permitted | 3000 kg / 6600 lbs. |
| Grinding Wheel | 750 x 65 x 305 mm dimensions |
| 350 - 850 rpm, 16 hp | |
| Headstock | 12-36 rpm in range 1 |
| 40-120 rpm in range 2 | |
| 3 hp, V-belt | |
| Grinding Table Movements | Feeds range 1 = 24-480 mm/min |
| Feeds range 2 = 95-1900 mm/min | |
| Rapid motion - 1900 mm/min | |
| Slow motion - 2 mm/min | |
| 1 rotation by hand = 3 mm | |
| 1 graduation = 0.1 mm | |
| Infeeds of Grinding Head | 0.003 - 0.06 mm |
| Normal - 2 mm/min | |
| Rapid - 350 mm/min | |
| 1 graduation = 0.01 mm | |
| 1 micro adjust by hand=0.001mm | |
| Water Tank | 1200 liters |
| Crowning | Installed |
| Sold "as is, where is" off foundation, in storage, USA |
PO Box 1164
Roxboro, NC 27573
+1 336 597 2370
+1 336 597 8633
sales@phippsMetals.com
Asset Sales and Marketing Software for Used and Surplus Industrial Machinery and Equipment Dealers