| Specification | Description |
|---|---|
| Manufacture | Achenbach / 1960 |
| 1985 - major upgrades | |
| Line Speed | 182 mpm max (600 fpm) |
| Strip Thickness | 6.0mm max entry (.236") |
| 0.8mm min exit (.032") | |
| Strip Width | 1050 - 1310mm (41 - 52") |
| Coil Size | ID - 600mm (23.6") |
| OD - 1220mm max (48") | |
| Weight - | |
| Maximum Separating Force | |
| Maximum Strip Tension | 4800 kg (10,000 lbs) |
| Equipment | |
| - Entry Coil Car | |
| - Uncoiler | 600mm diam mandrel, disk brake |
| - Leveler | 2-Hi, 160mm diam rolls |
| - Crop Shear | 13.3mm max thickness, 50 mton |
| - Tension Reels (2) | 600mm diam mandrels |
| 28 kW & 127 kW DC motors | |
| 360/600 rpm | |
| 5.643:1 gearbox ratio | |
| Belt wrappers | |
| - Mill | |
| - Roll Size | 650mm diam x 1400mm face |
| - Drive | 700 kW (950hp) |
| 500/700 rpm DC motor | |
| 600 VDC, 1260 amps max | |
| 8.375:1 gearbox ratio | |
| - Bearings | Roller type |
| - Bridles (2) | 1 entry side, 1 exit side |
| 5-roll type | |
| 4 x 125mm diam and 1 x 140mm | |
| 6150kg max closing force | |
| - Coolant System | 1500 litres/min, 30 kW pump |
| AB Schneider oil filter = | |
| 2500 litres/min | |
| 13 plates each 1 sq meter | |
| - Fume Exhaust System | 27,000 cubic meters/hr |
| - Fire Suppression System | 16 bottles, 30kg each, 4 zones |
| - Thickness Gauge | Included |
| Sold "as is, where is" off foundation, in excellent condition. |
PO Box 1164
Roxboro, NC 27573
+1 336 597 2370
+1 336 597 8633
sales@phippsMetals.com