| Specification | Description |
|---|---|
| Manufacture | Achenbach / 1972 |
| General Description | |
| - Cold mill reduction of aluminum plate for increased hardness and | |
| to specified thickness gauge. | |
| - Includes mill, side trim shear, end trim shear, and plate stretcher | |
| Capabilities | |
| - Mill Entry Thickness | 25mm max / .984" |
| - Mill Exit Thickness | 1.5mm min / .059" |
| - Plate Width | 1000 - 1500mm / 39.4 - 59.0" |
| - Plate Length | 5000mm max / 196.8" |
| Equipment | |
| - 2-Hi Plate Mill | |
| - Line Speed | 60 mpm max / 196 fpm |
| - Rolls | 900mm diam x 1800mm face |
| (35.4" diam x 70.8" face) | |
| - Separating Force | 1000 mtons max / 2,200,000lbs |
| - Max Roll Gap | 67mm / 2.6" |
| - Drive | 485 kW AC motor |
| 15.5:1 gear ratio | |
| - Electro-mechanical Screwdowns | |
| - Side Trimming Shear | |
| - End Trimming Shear | |
| - Plate Stretcher | |
| - Plate Sizes Produced | 1.5 x 1000mm & 4.0 x 1500mm |
| 65 KPA/mm2 max yield strength | |
| - Max Separating Force | 360 mton / 793,000 lbs |
| - Max Plate Length | 6500mm / 258" |
| - Max Stretcher Stroke | 250mm / 9.48" |
| - Two Hydraulic Units | 75 kW each |
| - Electric Supply | 380 volts, 50 Hz, 3 phase |
| Sold "as is, where is" installed. |
PO Box 1164
Roxboro, NC 27573
+1 336 597 2370
+1 336 597 8633
sales@phippsMetals.com