| Specification | Description |
|---|---|
| Manufacture | United / 1958 |
| Updated in 1997 | |
| Line Speed | 400 mpm max / 1312 fpm |
| Strip Thickness | |
| - Carbon Steel | 6mm max entry / .236" |
| 0.4mm min exit / .0157" | |
| - Stainless Steel | 5mm max entry / .197" |
| 0.5mm min exit / .0197" | |
| Strip Width | 600 - 2100mm / 23.6 - 82.6" |
| Coil Size | IDentry - 610 - 760mm /24 -30" |
| IDexit - 610mm / 24" | |
| OD - 1930mm max / 76" | |
| Wt - 45 mtons max / 99,180lbs | |
| Line Orientation | Right to Left |
| Equipment | |
| - Coil Lift Table | |
| - Uncoiler | 2 x 150kW Dc drive motors |
| 20-60 KN strip tension | |
| Hold down roll | |
| - Crop Shear | Eccentric design |
| - Carry-Over Table | |
| - Coil Car | Under floor type |
| - Right Tension Reel | 2 x 520kW DC drive motors |
| 20-180 KN strip tension | |
| Expanding mandrel w/ outboard | |
| - Entry Table | Right |
| - Main Mill | |
| - Work Rolls | 520-482mm diam |
| Roller bearings | |
| - Backup Rolls | 1423 - 1320mm diam |
| Morgoil bearings | |
| - Roll Face | 2235 mm / 88" |
| - Roll Bending | "Negative" system installed |
| - Screwdowns | Electro-mechanical |
| - Drive | 2 x 1500 kW DC motor |
| - Entry Table | Left |
| - Tension Reel | Left (same as right) |
| - Belt Wrapper | |
| - Electrics | Siemens, new 1997 |
| Sold "as is, where is" installed & under power. |
PO Box 1164
Roxboro, NC 27573
+1 336 597 2370
+1 336 597 8633
sales@phippsMetals.com
Asset Sales and Marketing Software for Used and Surplus Industrial Machinery and Equipment Dealers