| Specification | Description |
|---|---|
| Manufacture | Voest Alpine / VAI |
| 1962, updated 1998 | |
| Line Speed | 600 mpm max / 1968fpm |
| Strip Thickness | 6mm max entry / .236" |
| 0.25mm min exit / .0098" | |
| Strip Width | 800 - 1570mm / 31.5 - 61.8" |
| Coil Size | ID - 510-750mm / 20 - 29.5" |
| ID - exit - 610mm / 24" | |
| OD - 1800mm max / 70.8" | |
| Wt - 27 mton max / 59,500lbs | |
| Line Orientation | Left to Right |
| Mill Separating Force | 2000 mtons max / 4,400,000lbs |
| Equipment | |
| - Coil Carriage | Under floor |
| - Uncoiler | Double cone type |
| - Coil Opener / Carry Over Table | |
| - Tension Reel | Mandrel type - 560-620mm diam. |
| Drive - 2 x 840kW DC motors | |
| Siemens Simoreg SCR drive | |
| 2.3913:1 gear box | |
| - Main Mill Stand | |
| - Work Rolls | 450-395mm diam / 17.7 - 15.6" |
| Roller bearings | |
| - Backup Rolls | 1350-1230mm diam / 53-48.8" |
| Morgoil bearings | |
| - Drive | Two (2) motors per work roll |
| 950kW, 400 VDC each | |
| Siemens SimoregSCR drive | |
| 1.2105:1 gear box ratio | |
| - Gauge Control (new in 1998) | Electro-hydraulic rough adjust |
| Full hydraulic gap control | |
| finish adjust w/ 50mm stroke | |
| Toshiba isotope gauge | |
| Mass flow control | |
| - Mill Tables | |
| - Tension Reel | Mandrel - 560-620mm diam |
| - Electrics | New 1998 |
| Siemens SCR DC power sources | |
| Siemens Simatic S5 controls | |
| - Coolant System | Included, soluble oil type |
| - Spare Parts | Large group of rolls and |
| parts available. | |
| Sold "as is, where is" installed and under power. |
PO Box 1164
Roxboro, NC 27573
+1 336 597 2370
+1 336 597 8633
sales@phippsMetals.com
Asset Sales and Marketing Software for Used and Surplus Industrial Machinery and Equipment Dealers