Request A Quote On This Item| Specification | Description |
|---|---|
| Manufacturer | United |
| Line Speed | 1224fpm max / 373 mpm |
| Strip Thickness | .030 - .090" / 0.76 - 2.28mm |
| Strip Width | 24 - 60" / 610 - 1524mm |
| Coil Size | ID - 30 entry, 24" exit |
| OD - 54" max / 1371mm | |
| Wt - 40,000lbs max / 18.1mtons | |
| Separating Force | 1928 UStons max / 1749mtons |
| Previous Use | Carbon steel skin pass mill |
| 750,000 tons/yr capacity | |
| Equipment | |
| - Entry Coil Conveyor | Saddle type |
| - Entry Coil Car | |
| - Coil Processor | |
| - Uncoiler | Dual stub mandrel |
| Electro-mechanical | |
| 2 x 100hp DC motors | |
| 515/1700rpm, 8.27:1 gear ratio | |
| - Main Mill | |
| - Includes | 2 housings, 2 shoeplates |
| - Post Size | 29" x 19" / 736 x 482mm |
| - Window | 191" H x 61" W |
| - Work Rolls (2 assemblies included) | 20.5" diam x 66" face |
| 520mm diam x 1676mm face | |
| Roller bearings | |
| - Backup Rolls (2 assemblies included) | 56" diam x 66" face |
| 1422mm diam x 1676mm face | |
| Roller bearings | |
| - Drive | 1750hp / 1305 kW |
| 300/600 rpm DC motor | |
| 2.517:1 gear box | |
| Pinion stand | |
| Only work rolls are driven | |
| - Screwdowns | Electro-mechanical |
| - Spindles | 2 gear types spindles included |
| - Tension Reel | Expanding mandrel type |
| 800 hp DC motor | |
| 400/900 rpm | |
| - Exit Coil Car | |
| - Electrics | 230 Volts DC |
| - Spares | 16 work roll chocks (total) |
| 8 backup roll chocks (total) | |
| Sold "as is, where is" installed, not in operation. | |
PO Box 1164
Roxboro, NC 27573
+1 336 597 2370
+1 336 597 8633
sales@phippsMetals.com