| Specification | Description |
|---|---|
| Manufacture | Achenbach / Mino |
| New 1961/ 1996 & 2003 upgrades | |
| Line Speed | 370 mpm max / 1200 fpm |
| Strip Thickness | Max entry - 4.0mm / .157" |
| Min exit - 0.1mm / .004" | |
| Strip Width | 275 - 515 mm / 10.8 - 20.0" |
| Coil Size | ID - 400mm / 15.75" |
| OD - 1350mm max / 53" | |
| Wt - 5.5 mtons max / 12,000lbs | |
| Separating Force | 600 mrons max / 1,322,000lbs |
| Material Formerly Rolled | Copper, brass, bronze, |
| silver, and nickel | |
| Equipment | |
| - Coil Carriage | Under-floor type |
| - Uncoiler | Mandrel type / hyd. expansion |
| Hyd. pinch rolls/ sliding base | |
| 87.6 kW DC drive | |
| - Carryover Table | |
| - Edge Guide System | |
| - Paper Winder | |
| - Two Tension Reels | 400mm diam mandrel types |
| 220 kW DC drives | |
| Hydraulic pinch rolls | |
| Mill tables | |
| - Crop Shear & Stripper | |
| - Main Mill | |
| - Work Rolls | 300mm diam x 570mm face |
| (11.8" diam x 22.4" face) | |
| Roller bearings | |
| - Backup Rolls | 610mm diam x 550mm face |
| (24" diam x 21.6" face) | |
| Roller bearings | |
| - Thickness Gauge | Vollmer, mass flow system |
| - AGC System | Electromechanical with final |
| adjust by hydraulic | |
| - Roll Bending | Positive and negative |
| - PLC | Siemens S7 |
| - Drive | 500kW DC motor |
| - Spares | Included |
| Sold "as is, where is" off foundation. | |
PO Box 1164
Roxboro, NC 27573
+1 336 597 2370
+1 336 597 8633
sales@phippsMetals.com