Request A Quote On This Item| Specification | Description |
|---|---|
| Manufacturer | United |
| Prior Use | Tempered carbon steel strip |
| Strip Thickness | .030 - .090" / 0.76 - 2.29mm |
| (actual use) | |
| Strip Width | 24 - 60" / 610 - 1524mm |
| Coil Size | ID - 24" / 610mm |
| OD - 54" max / 1371mm | |
| Weight - 40,000lbs max /18.1MT | |
| Separating Force | 19" x 29" post cross-section |
| 1928 US tons max / 1749MT | |
| Equipment | |
| - Entry Coil Conveyor | |
| - Entry Coil Car | |
| - Coil Processor | |
| - Uncoiler | Dual stub type |
| Two 100hp DC motors | |
| 515/1700rpm, 8.27:1 gearbox | |
| - Mill Stand | |
| - Mill Housings | 2 included |
| - Shoeplates | 2 included |
| - Drive | Through work rolls |
| 1750hp / 1305kW DC motor | |
| 300/600 rpm | |
| - Gearbox and Pinion Stand | 2.517 : 1 gearbox & pinion |
| - Gear Spindles | 2 included |
| - Work Rolls | 20.5" diam x 66" face |
| 4 work rolls | |
| 16 work roll chocks & bearings | |
| - Backup Rolls | 56" diam x 66" face |
| 4 back-up rolls | |
| 8 back-up roll chocks&bearings | |
| - Screwdowns | Electro-mechanical |
| 2 x 35hp motors | |
| - Recoiler / Tension Reel | Mandrel type |
| 800 hp / 600kW | |
| 400/900rpm DC motor | |
| - Exit Coil Car | |
| Sold "as is, where is" installed. |
PO Box 1164
Roxboro, NC 27573
+1 336 597 2370
+1 336 597 8633
sales@phippsMetals.com