| Specification | Description |
|---|---|
| Manufacturer | Robertson / New 1948 |
| Upgrades in 1973, 80, 90 | |
| Line Speed | Two-speed gearbox : |
| - Low = 100mpm / 328 fpm | |
| - High = 220 mpm max / 722 fpm | |
| Strip Thickness | 7.0 mm max entry / .276" |
| 0.5mm min exit / .020" | |
| Strip Width | 1340mm max / 52.75" |
| Coil Size | ID - 335mm / 13.1" |
| OD - 1210mm max / 47.6" | |
| Spool Face - 1300 & 1500mm | |
| Wt - 2700kg max / 6000lbs | |
| Separating Force | 1000 mton max / 2,200,000 lbs |
| Past Use | Rolling 1xxx, 3xxx, 5xxx, and |
| 8xxx series alloys up to 5% Mg | |
| with 10 - 60% pass reductions | |
| Equipment | |
| - Uncoiler | Cone type |
| 2 x 85hp DC brake generators | |
| 590/1600 rpm | |
| Plus mechanical brake | |
| 4000 kg max unwind tension | |
| - Mill | |
| - Drive | 750hp, 500/1000rpm DC motor |
| 2-spd gearbox : 1.9:1 & 3.8:1 | |
| 11,000 kg-M max exit torque | |
| - Work Rolls | 355mm diam x 1473mm face |
| (14" diam x 58" face) | |
| - Backup Rolls | 736mm diam x 1473mm face |
| (29" diam x 58" face) | |
| - Electro-Mechanical Screwdowns | Manual control |
| - Coolant System | 2000 liters/min Schneider |
| plate filter | |
| - Fume Exhaust System | |
| - Power Sources | MG set type DC power |
| - Recoiler | Cone type |
| 275 hp, 500/1000rpm DC motor | |
| 2-spd gearbox : 9.4:1 & 18.8:1 | |
| 7400 kg-M max torque | |
| Sold "as is, where is" installed. |
PO Box 1164
Roxboro, NC 27573
+1 336 597 2370
+1 336 597 8633
sales@phippsMetals.com