| Specification | Description |
|---|---|
| Manufacture | United |
| 1955 / continuous upgrades | |
| Mill Design | 4-Hi, Single stand, reversing |
| Line Speed | 1600 fpm max / 487 mpm |
| Strip Thickness | Entry max - .190" / 4.62mm |
| Exit min - .032" / 0.81mm | |
| Strip Width | 80" max / 2032mm |
| Coil Size | ID - 24 & 30" / 610 & 762mm |
| OD - 78.7" max / 2000mm | |
| Weight - 79,200lbs / 35.9mtons | |
| Separating Force | 380 US tons max / 344 mtons |
| 31" x 35" post size | |
| Equipment | |
| - Uncoiler | Stub mandrel type |
| 2 x 200hp DC motors / 150 kW | |
| 300/1200 rpm / 3.8:1 gearboxes | |
| - Tension Reels | 1400 hp DC motor / 1044 kW |
| 200/700 rpm | |
| 2.6:1 gearbox | |
| Belt wrapper on exit reel | |
| Outboard bearings | |
| - Mill | |
| - Drive | 4000 hp DC motor / 2984 kW |
| 150/300 rpm | |
| Driving work rolls only | |
| - Work Rolls | 20.5" diam x 90" face |
| Roller bearings | |
| - Backup Rolls | 56" diam x 90" face |
| Morgoil bearings | |
| - Screwdowns | Electro-mechanical |
| 2 x 75 hp , 515/1300 rpm | |
| Sold "as is, where is" on foundation. |
PO Box 1164
Roxboro, NC 27573
+1 336 597 2370
+1 336 597 8633
sales@phippsMetals.com