| Specification | Description |
|---|---|
| Manufacture | Blaw Knox |
| 1963 / Rebuilt 1980 | |
| Line Speed | 5000 fpm max / 1524 mpm |
| Strip Thickness | Entry max - .125" / 3.1mm |
| Exit min - .006" / 0.15mm | |
| Strip Width | 30 - 40" / 762 - 1016mm |
| Coil Size | ID - 24" / 610mm |
| OD - 96" max / 2438mm | |
| Weight | |
| Separating Force | 2,500,000 lbs max per stand |
| Equipment | |
| - Coil Preparation | Coil Opener |
| Rough Flattener | |
| 3-roll Flattener | |
| Crop shear | |
| - Uncoiler | Expanding cone type - 21 to 26 |
| 2 x 75 hp DC drag generators | |
| thru 8.6:1 gear boxes | |
| - Work Rolls | 18" diam x 44" face |
| Roller bearings | |
| - Backup Rolls | 46" diam x 44" face |
| Morgoil bearings | |
| - Mill Drives | |
| - Stand 1 | 2500 hp - 140/280 rpm |
| - Stand 2 | 2500 hp - 233/466 rpm |
| - Stand 3 | 2000 hp - 382/764 rpm |
| - Stand 4 | 2000 hp - 478/955 rpm |
| - Stand 5 | 2000 hp - 530/1060 rpm |
| - All stand drives are straight with no gear reduction | |
| - Recoiler | Expanding mandrel type |
| 24" diam x 66" face | |
| 4 x 200 hp, 500/2000rpm DC | |
| motors thru 2.29:1 gearbox | |
| Belt Wrapper | |
| Spool Conveyor | |
| - Gauge Control | AGC system included |
| - Mill Controls | Included |
| MORE DETAILS COMING | |
| Sold "as is, where is" on foundation. |
PO Box 1164
Roxboro, NC 27573
+1 336 597 2370
+1 336 597 8633
sales@phippsMetals.com