| Specification | Description |
|---|---|
| Manufacture | Stamco / 1985 |
| Upgrades through the years | |
| Line Speed | 2500 fpm max |
| Strip Thickness | .005" - .020" |
| Strip Width | 66" max / 1676mm |
| Coil Size | Entry ID - 20" |
| Exit ID - 16/20" | |
| OD - 96" | |
| Weight - 40,000 lbs. max. | |
| Slitting Capacity | Up to 30 cuts |
| Equipment | |
| - Spool Storage Table | |
| - Turnstile | Power rotation 4-arm |
| - Entry Coil Car | On rails, V-bed |
| - Uncoiler | Expanding mandrel, DC drives |
| - Entry Steering Sled | |
| - Entry Pinch Roll | |
| - Surface Inspection Unit | On rails, with mirrors |
| - Bridle Stand | S-wrap, for AccuRay and steady |
| coil set device | |
| - Slitter | 2 heads included |
| Current = 1 packed,1 side trim | |
| 6.5" diam arbors | |
| 75hp, 300/1800rpm, 240VDC | |
| GE Series 6 PLC control | |
| - Looping Pit | Use pit or use railed |
| cross-over table. | |
| - Tension Stand | |
| - Oiler | |
| - Strip Turndown Roll | |
| - Recoiler | 250hp DC drive |
| Expanding mandrel | |
| Outboard bearing | |
| Hydraulic push-off | |
| - Turnstile | 1-arm |
| Hyd. lift height adjust to | |
| meet coil coming off recoiler | |
| - Coil Downender | Takes coil from turnstile to |
| downend to pallet | |
| - Tooling | High-quality precision ground |
| Sold "as is, where is" installed, USA |
PO Box 1164
Roxboro, NC 27573
+1 336 597 2370
+1 336 597 8633
sales@phippsMetals.com
Asset Sales and Marketing Software for Used and Surplus Industrial Machinery and Equipment Dealers