| Specification | Description |
|---|---|
| Manufacture | Cincinnati Forte |
| Strip Thickness | .015 - .125" / 0.38 - 3.17mm |
| Strip Width | 12 - 60" / 305 - 1524mm |
| Coil Size | ID - 19/24" entry, 20" exit |
| OD - 72" max / 1828mm | |
| Weight - 40,000 lbs max / 18MT | |
| Line Speed | 400 fpm max bare drum/ 122 mpm |
| Material Capability | 50,000 psi shear strength |
| 40,000 psi yield strength max | |
| Ran cold and hot rolled steel | |
| Equipment | |
| - Entry Turnstile | 4-arm, 40,000 lbs each |
| Powered rotation | |
| - Entry Coil Car | Floor mounted mast type |
| Self-contained hydraulics for | |
| traverse and lift | |
| - Uncoiler | Mandrel type, hyd. expansion |
| Wichita water cooled brake | |
| Sliding base, hyd feed-up roll | |
| - Entry Conditioning Unit | Blade type peeler |
| edge guides | |
| powered pinch rolls | |
| downcut crop shear | |
| - Slitter Head | 2 crane removable heads |
| 7.0" diam arbors | |
| Powered top arbor adjust | |
| Powered outboard retraction | |
| 75 hp DC slitter drive | |
| - Scrap Winders | 2, hyd. level winding |
| - Pit Table & Tension Stand | Bronx |
| Drag type with air bladder | |
| Separator arm | |
| - Recoiler | 20" diam mandrel |
| Hyd expansion, Hyd pushoff | |
| Overarm separator | |
| 250 hp DC drive | |
| - Exit Turnstile | 4-arm, 40,000 lbs each |
| Powered rotation, hyd pushoff | |
| Slotted for C-hook pickup | |
| - Electrics and Controls | Complete, panels, cabinets,etc |
| Sold "as is, where is" installed, USA. |
PO Box 1164
Roxboro, NC 27573
+1 336 597 2370
+1 336 597 8633
sales@phippsMetals.com
Asset Sales and Marketing Software for Used and Surplus Industrial Machinery and Equipment Dealers