| Specification | Description |
|---|---|
| Manufacturer | Stanat - model S-190-18 |
| Coil Size | ID - 14 to 21" expansion range |
| Wt - 4000 lbs max | |
| Material | Copper Alloys / Brass |
| Aluminum / Mild steel / | |
| Stainless steel | |
| Equipment | |
| - Uncoiler | Manual expanding mandrel |
| 3 mandrel segments | |
| 26" mandrel face | |
| Air brake | |
| - Slitter | 2.625" diam arbors |
| Entry swing-away table | |
| Entry passline roll | |
| Entry drag wiper | |
| Entry side guides | |
| Steel stripper ring assembly | |
| Parallel top arbor adjust | |
| Exit pinch rolls | |
| 10hp DC drive | |
| Air clutch | |
| - Recoiler Assemblies (2) | Common drive w/ slitter head |
| Air clutch | |
| - 5 RecoilerMandrels | 2 x 6" diam x 23.5" face |
| 1 x 10" diam x 23.5" face | |
| 1 x 12" diam x 23.5" face | |
| 1 x 8" diam x 24.25" face | |
| (w/ 12" & 16" bolt-on pads) | |
| - Scrap Winder | Ruesch |
| Air motor driven | |
| Oscillating wind pattern | |
| Manual removal | |
| - Solid State DC drive | by MCI, new 2001 |
| - Tooling | "good amount" |
| Sold "as is, where is" off foundation. |
PO Box 1164
Roxboro, NC 27573
+1 336 597 2370
+1 336 597 8633
sales@phippsMetals.com