Request A Quote On This Item| Specification | Description |
|---|---|
| Manufacturer | HJ Ruesch Co. |
| 1980 / Model 149 | |
| Type | Ring slitter with looping mode |
| Coil Size | ID - 12 and 16" |
| Weight - 5000lbs | |
| Strip Thickness | .005 - .040" / 0.127 - 1.0mm |
| Slitting Capacity | Number of 1" wide cuts at.... |
| 6 cuts at .040" | |
| 6 cuts at .035" | |
| 9 cust at .025" | |
| 16 cuts at .010" | |
| Equipment | |
| - Uncoiler | 6000 lb capacity by Regal |
| 3-leaf expanding mandrel | |
| - Ultrasonic Loop Control | New 1998 |
| - Slitter Head | Arbor diameter - 2.875" |
| Arbor face - 18.0" | |
| - Recoiler | Dual shaft, 5000 lb capacity |
| Electric clutches by Warner | |
| 12" and 16" diameter mandrels | |
| Manual pinch rolls | |
| Overarm separator | |
| - Exit Turnstile | |
| - Electrics | 480 V / 3 ph / 60 Hz |
| Sold "as is, where is" |
PO Box 1164
Roxboro, NC 27573
+1 336 597 2370
+1 336 597 8633
sales@phippsMetals.com