Request A Quote On This Item| Specification | Description |
|---|---|
| Manufacture | Ingersol / 1958 |
| Slab Thickness | 16" max / 406mm |
| 11-13" common actual use | |
| Slab Width | 36 - 48" / 914 - 1219mm |
| Slab Length | 72" max / 1828mm |
| Can be extended | |
| Head Cutting Diameter | 64" / 3454mm |
| Cutting Heads | 8 rough cut |
| 1 finish cut | |
| 1 empty for 2nd finish cut | |
| if needed or wanted | |
| Peripheral Cutting Speed | 900 rpm or 15,000 fpm |
| Feed Rate | 70"/min or 1778mm/min |
| Nominal Cut Depth | .250" / 6mm |
| Cutter Drive | 200hp main motor |
| 800 amp disconnect | |
| Controls | Allen-Bradley PLC-504 |
| With Panelview | |
| Scalped Chips Handling | Chopper system |
| 5000 cfm blower | |
| Sold "as is, where is" installed and under power. |
PO Box 1164
Roxboro, NC 27573
+1 336 597 2370
+1 336 597 8633
sales@phippsMetals.com