| Specification | Description |
|---|---|
| Manufacture | Clecim, Selas, etc. |
| New in 1986 | |
| Nominal Capacity | 500,000 mtons/yr |
| Line Speed | 220 mpm max / 720 fpm |
| Strip Thickness | 0.35 - 2.5mm / .0138 - .098" |
| Strip Width | 600 - 1650mm / 23.6 - 65" |
| Coil Size | ID - |
| OD - 2500mm max / 98.4" | |
| Weight - 42 mton max/92,568lbs | |
| Thermal Capacity | |
| a. Up to 1000mm strip width | 83 mton/hr at 750 degrees C |
| 71 mton/hr at 800 degrees C | |
| b. Over 1400mm strip width | 117 mton/hr at 750 degrees C |
| 100 mton/hr at 800 degrees C | |
| Line Length | 235 m / 770 feet |
| Equipment | |
| - Uncoilers | Two, each with coil cars |
| - Levelers | Two |
| - Thickness Guages | Two, isotope type |
| - Double Shear | One, hydraulic |
| - Butt Welding & Notching Machine | One |
| - Entry Accumulator | 500 m storage |
| 3 strip guides | |
| - One Preheat Zone | |
| - One Direct Fired Zone | |
| - One Radiant Tube Zone | |
| - One Soak Zone | |
| - One Gas Jet Cooling Zone | |
| - One Roll Quench Zone | |
| - Two Over-Aging Zones | |
| - One Water Cooling Zone | |
| - One Roll Dryer Unit | |
| - Exit Accumulator | 670 m storage |
| 3 strip guides | |
| - Skin Pass Mill | 6-Hi type |
| 920mm min diam backup rolls | |
| 400mm min diam intermed. rolls | |
| 350mm min diam work rolls | |
| 1200mton separating force | |
| Flatness roll (new 1990) | |
| - Inspection Tower | Vertical, with strip guide |
| - Edge Trimmers | Two, new 1997 |
| - Surface Inspection Unit | new 1990 |
| - Thickness Control | Isotope guage |
| - Exit Crop Shear | |
| - Recoilers | Two, both with coil cars |
| - Coil Banding Machine | with scale |
| - Spares | Many rolls |
| Many mech. and elec. parts | |
| Sold "as is, where is" installed. |
PO Box 1164
Roxboro, NC 27573
+1 336 597 2370
+1 336 597 8633
sales@phippsMetals.com
Asset Sales and Marketing Software for Used and Surplus Industrial Machinery and Equipment Dealers