| Specification | Description |
|---|---|
| Manufacture | Wean / 1964 |
| Continuous upgrades thru 1989 | |
| Line Speed | 100 mpm max / 328 fpm |
| Strip Thickness | 0.30 - 3.0mm / .0118 - .118" |
| Strip Width | 550 - 1250mm / 21.7- 49.2" |
| Production Capacity | 28 mtons/hr for 1.0mm x 1000mm |
| 200,000 mtons/yr (2002) actual | |
| Coil Size | ID - 508/610mm entry & exit |
| - ID (entry and exit) | 508/610mm / 20"/24" |
| - Entry OD | 2100mm / 82.6" |
| - Exit OD | 1550mm / 61" |
| - Entry Weight Capacity | 27 mtons / 59,508lbs max |
| - Exit Weight Capacity | 13.5 mtons / 29,754lbs max |
| Quality Levels Produced | CQ, DQ |
| Equipment | |
| - Entry Section | 2 uncoilers |
| 2 flatteners | |
| 2 shears | |
| 2 thickness gauges | |
| Common bridle | |
| Common welder | |
| Common entry looper (265m) | |
| - Furnace and Zinc Pot Section | Non-oxidizing RTF section |
| Non-oxidizing soak section | |
| with jet cooler | |
| 120mton zinc pot | |
| Stabilizing roll | |
| Sink roll | |
| Cooling tower | |
| Quench and squeegee rolls | |
| Bridle | |
| - Chromate Treatment Section | Chromating |
| AFP section | |
| Bridle | |
| Exit looper (220m) | |
| Steering rolls | |
| Bridle | |
| - Exit Section No. 1 | Shear, rewind, tension leveler |
| with 6 bridle rolls | |
| - Exit Section No. 2 | Shear, rewind, two coil cars |
| - Hydraulics | Complete |
| - Normal Operating Crew | 7 men per shift |
| Sold "as is, where is" installed and running as of April 2008 |
PO Box 1164
Roxboro, NC 27573
+1 336 597 2370
+1 336 597 8633
sales@phippsMetals.com
Asset Sales and Marketing Software for Used and Surplus Industrial Machinery and Equipment Dealers